Bose FS2SE

Description

FS2SE comes with 2.25 full range transducer delivering low frequency range down to 83Hz, 16 ohm and 70/100v line operation, all weather speaker, surface mounted, comes in white and black options, best for commerical application, small home theatres.

SINGLE LOUDSPEAKER PERFORMANCE
Frequency Response (-3 dB) (1) 95 – 16,000 Hz
Frequency Range (-10 dB) (1) 83 – 19,000 Hz
Nominal Coverage Angle (H × V) (1 – 4 kHz) 145° × 140°
Nominal Coverage (H x V) (1 – 10 kHz) 130° × 130°
AES transducer test (5) Bose extended-lifecycle test (4)
Power Handling, Long-term Continuous 20 W 16 W
Power Handling, Peak 80 W 64 W
Sensitivity SPL/1W @ 1 m (2) 87 dB 87 dB
Calculated Maximum SPL @ 1 m (3) 100 dB 99 dB
Calculated Maximum SPL @ 1 m, Peak 106 dB 105 dB
Loudspeaker EQ
No Bose EQ required when speaker used for general use. Bose EQ Voicing and SmartBass available. EN54-24 Equalization is required for EN54-24 use; refer to FS2SE EN54-24 Certified ratings
document on pro.bose.com for details
Recommended High-Pass Protection 85 Hz with minimum 24-dB/octave filter
Transformer taps 70V: 1, 2, 4, 8, 16 W, bypass
100V: 2, 4, 8, 16 W, bypass
TRANSDUCERS
Full-Range Driver 1 × 2.25-inch woofer (57 mm)
Nominal Impedance 16 ohms (transformer bypass)

PHYSICAL
Enclosure Material Engineered plastics, highly UV fade-resistant
Bracket Material Powder-coated steel
Grille Perforated steel, powder-coated finish, tamper-resistant design
Logo Rotatable, removable
Color Black (similar to Ral 9005), White (similar to Ral 9003)
Environmental/Ingress Protection (6)
Rated for direct-exposure outdoor installations (IP55 per EN60529; IP33C per EN54-24). Suitable for
use outdoors in wet locations. Includes weather-resistant input cover. Optional accessory aluminum
grille for harsh environments to prevent red corrosion is available.
Safety Agency Certification: EN54-24:2008 for Voice Alarm Systems, UL 1480 UUMW, CAN/ULC-S541 UUMW7 for
Speakers for Fire Alarm and Signaling Systems. Installation: NFPA 70, NFPA 72, CSA C22.1
Section 32
For EN54-24 specifications, Refer to FS2SE EN 54-24 Certified Ratings document on pro.bose.com.
EN54-24 Equilization required for EN54-24 use.
Operating Temperature Range -25 °C to 70 °C (-13 °F to 158 °F)
Connectors Euroblock 6-pin connector with loop-through, mounted on top. Accepts 18 AWG (0.8 mm2) to 14
AWG (2.5 mm2) size wire. Includes input cover.
Suspension/Mounting External U-bracket with bracket screws
7 preset mounting angles: 0°, +15°, +30°, or +45° for wall or ceiling placement
Two (2) rear M8 screw inserts for use with optional Ceiling Mount Ceiling Mount Bracket S2,
DMSBRKT pan-and-tilt bracket
Safety cable can be used with either of two (2) rear M6 inserts when using included U-bracket,
or with either of two (2) side M5 inserts, when using optional brackets
Dimensions (H × W × D) 182 × 113 × 114 mm (7.1 × 4.4 × 4.5 in)
Dimensions with Bracket (H × W × D) 196 × 113 × 135 mm (7.7 × 4.4 × 5.3 in)
Net Weight, Loudspeaker with Grille and Bracket
(Single)
1.43 kg (3.15 lb)
Shipping Weight (Pair) 4.17 kg (9.2 lb)
Included Accessories Each FS2SE includes one (1) Bose logo for vertical orientation, one (1) U-Bracket
and one (1) weather-resistant input cover
Optional Accessories Aluminum Grille kit (2-pack), DesignMax DMSBRKT pan-and-tilt bracket (for indoors),
Ceiling Mount Bracket S2, Ceramic Terminal and Thermal Fuse Kit (10-pack)

for more details click here