ABB Premium Dali Gateway DG/S1.64.5.1

Description

Single-Master DALI Controller ce. to DALI-2 (EN 62386). The device is used to control DALI or DALI-2 devices , tunable lights control from 2700 -6500 color temp

Single-Master DALI Controller certificated acc. to DALI-2 (EN 62386). The device is used to control DALI or DALI-2 devices via ABB i-bus® KNX. Two DALI output for up to 64 DALI participants. DALI power supply is integrated. Control and status feedback is carried out via KNX per DALI participants (64), with lighting groups (16), together in broadcast or per scenes (16). DALI devices type DT1 (Self-contained emergency converter acc. EN 62386-202) and type DT8 (colour temperature Tc & RGB(W) acc. EN 62386-209) will be supported. Other DALI devices e.g., DT6 can be controlled via standard DALI commands acc. to EN 62386-102.
Extensive fault and error messages are available. Slave-, staircase-, force-, block- and scene-function are integrated. Colour can set and dim, HSV(W)-, Dim2Warm-, HCL-function, 4 sequencer per DALI output can be used. A standby switch-off in combination with a KNX switch actuator (e.g., SA/S) and the integration of the DALI Gateways into a load control system are possible. By means of KNX and DT1 converter different emergency tests (e.g., function and duration test) can be triggered, test results are transferred back to KNX.
For diagnostic use and individual change of the DALI address or group assignment a separate software tool (ABB i-bus® Tool) is available.

The fault status (lamps, ballasts or emergency lighting
converters) of each DALI device or of the lighting group
is sent via the KNX bus by a variety of KNX group
objects.
In addition to the standard functions, e.g. switching,
dimming and brightness value setting with the corresponding feedback, the DALI-Gateway offers the functions Staircase lighting, Scene, Slave, Forced operation
and Disable. The lighting groups or individual lamps
can be integrated in an energy-efficient building automation system via a KNX presence detector or light
controller.
The DALI-Gateway DG/S 1.64.5.1 / DG/S 2.64.5.1
features the Tunable White (Tc) color function, which
allows you to set and dim the color temperature of
lamps (DT8). There are also settings options for the
additional Dim2Warm and Human Centric Lighting
(HCL) functions.
Other functions include 1-bit scene retrieval and ballast
supply voltage switch-off (standby switch-off) in combination with a KNX switch actuator.
Function, duration and partial duration tests and battery tests for self-contained emergency lighting
systems to IEC 62 386-202 can be triggered and
stopped via KNX, with results provided on the KNX
bus.
The DALI-Gateway possesses a wide-range supply voltage input. No separate DALI power supply is required.
The DALI power supply for 64 DALI devices per output
is integrated in the DALI-Gateway.
The ABB i-bus® Tool permits commissioning (DALI) and
diagnostics without ETS

Description of product
The KNX ABB i-bus® DALI-Gateway Premium
DG/S 1.64.5.1 / DG/S 2.64.5.1 is a KNX modular installation device (MDRC) in ProM design for installation in
the distribution board on a 35 mm mounting rail.
It is a DALI single-master controller to DALI standard
IEC 62 386 Parts 101ed2 and 103ed1. The gateway is
suitable for use with DALI and DALI-2 systems. It supports Type 0, 1 and 8 DALI operating devices with DALI
interfaces to IEC 62 386 and their integration in a KNX
building installation.
Up to 64 DALI devices can be connected to the DALI
output. “Normal” lamps (DT0), self-contained emergency lights (DT1) and color control lamps (DT8) can all
be connected to the DALI output in a mixed configuration.
The lamps are controlled via KNX using
• broadcast (all lamps jointly)
• 16 lighting groups
• 64 individual lamps
• 16 scenes
• 64 self-contained emergency lig

Technical data
KNX DALI gateway DALI single-master controller IEC 62 386 Parts 101ed2 and 103ed1
(DALI and DALI-2)
Supply Gateway supply voltage 100 – 240 V AC
Voltage range 85…265 V AC, 50/60 Hz
110…240 V DC
DG/S 1.64.5.1 DG/S 2.64.5.1
Power consumption total via mains*) Maximum 6 W Maximum 11 W
Current consumption total via mains*) Maximum 25 mA Maximum 48 mA
Leakage loss total for device*) Maximum 2 W Maximum 4 W
KNX current consumption Maximum 10 mA
Power consumption via KNX Maximum 210 mW
DALI outputs (channels) DG/S 1.64.5.1 DG/S 2.64.5.1
Number of outputs 1 2
Voltage proof, short circuit proof 230 V AC
Maximum 64 per output to IEC 62 386;
DALI devices for self-contained emergency
lighting to IEC 62 386-202 are supported.2)
Number of DALI devices Maximum 64 per output to IEC 62 386;
DALI devices for self-contained emergency
EAN Code -4016779067201

Pls click here for more information