SALE!NEW!
SA/S4.6.2.2 4 channel switch actuator KNX
Original price was: ₹37,276.00.₹35,000.00Current price is: ₹35,000.00.
Description
The switch actuator uses potential free contacts to switch 4 independent electrical loads via the ABB i-bus® KNX. The device features a manual operation and displaying of the switching state of the outputs.
The 6 A device is especially suited to switch resistive, inductive or capacitive loads. The d
evice is powered by KNX and requires no additional power supply
Main benefits*
- Maximizes design freedom for KNX system integrators supporting a wide-range of switching requirements and installation types (MDRC, FM, SM)
- Assists the work of the integrator thanks to the simple and quick installation and intuitive manual control of outputs
- Flexibility from planning to final realization thanks to combined switching and shading functionality in the same device
-
Industry standard selection of analog actuators allowing control and integration of divers electrical consumers, e.g. HVAC
Main features*
- Complete range of rated currents: 6 A, 10 A, 16 A-AC1 and 16/20 AX C-Load
- Range of compact, combi devices with dual functionality
- Copying and exchanging ETS parameter settings to optimize commissioning work
- Simple and quick installation thanks to robust combi screw-head terminal
General technical data
Device Dimensions 90 × 70 × 63.5 mm (H x W x D)
Mounting width in space units 4 modules, 17.5 mm each
Weight 0.22 kg
Mounting position Any
Mounting variant 35 mm mounting rail
Design ProM
Degree of protection IP 20
Protection class II
Overvoltage category III
Pollution degree 2
Materials Housing Polycarbonate, Makrolon FR6002, halogen free
Material note Fire classification Flammability V-0
Electronics Rated voltage, bus 30 V DC
Voltage range, bus 21 … 31 V DC
Current consumption, bus < 12 mA
Maximum current, device 4 × 6 A
Power loss, device ≤ 1.2 W
Power loss, bus ≤ 0.25 W
KNX safety extra low voltage SELV
Connections Connection type, KNX bus Plug-in terminal
Cable diameter, KNX bus 0.6 … 0.8 mm, solid
Connection type, load circuit Screw terminal with universal head (PZ 1)
Pitch 7.62 mm
Tightening torque, screw terminals 0.5 … 0.6 Nm
Conductor cross-section, flexible 1 × (0.2 … 4 mm²) / 2 × (0.2 … 2.5 mm²)
Conductor cross section, rigid 1 × (0.2 … 6 mm²) / 2 × (0.2 … 4 mm²)
Conductor cross section with wire end ferrule without
plastic sleeve
1 × (0.25 … 2.5 mm²)
Conductor cross section with wire end ferrule with
plastic sleeve
1 × (0.25 … 4 mm²)
Conductor cross section with TWIN wire end ferrule 1 × (0.5 … 2.5 mm²)
Certificates and declarations Declaration of conformity CE → 2CDK505253D2701
Ambient conditions Operation -5 … +45 °C
Transport -25 … +70 °C
Storage -25 … +55 °C
Humidity ≤ 95 %
Condensation allowed No
Atmospheric pressure ≥ 80 kPa (corresponds to air pressure at 2,000 m above sea
Click here for more info regarding ABB KNX products
Reviews
There are no reviews yet.