SV/S30.640.3.1 Power Supply, 640 mA, ABB KNX

The two-color LED indicates device output status. Device type SV/S 30.640.3.1 has an additional 30 V DC short-circuit and overload protected voltage output that can be used to power an additional bus line (in combination with a separate choke). With two-coloured status indicator and wide range input from 85…265 V AC, 50/60 Hz

Technical data
Supply Supply voltage Us 100 – 240 V AC, 50/60 Hz
(85…265 V AC)
Power consumption
– SV/S 30.160.1.1
– SV/S 30.320.1.1
– SV/S 30.640.3.1
Normal operation
6.6 W
12.5 W
24 W
Maximum
21 W
30 W
55 W
Power loss
– SV/S 30.160.1.1
– SV/S 30.320.1.1
– SV/S 30.640.3.1
Normal operation
1.8
2.5 W
4 W
Maximum
4.4
6 W
9 W
Outputs KNX voltage output I1
– Rated voltage UN
– Minimum distance between
2 SV/S in one line
1 line with integrated choke
30 V DC +1/-2 V, SELV
200 m (KNX bus line)
Voltage output I2
(SV/S 30.640.3.1 only)
– Rated voltage UN
without choke
30 V DC +1/-1 V, SELV
The voltage output without choke may
only be used to power an additional bus
line in combination with a separate choke.
Current
– SV/S 30.160.1.1
– SV/S 30.320.1.1
– SV/S 30.640.3.1
(total current I1 and I2)
Rated current IN
160 mA
320 mA
640 mA
Current
– SV/S 30.160.1.1
– SV/S 30.320.1.1
– SV/S 30.640.3.1
(total current I1 and I2)
Overload current IOvl
0.3 A
0.5 A
0.9 A
Current
– SV/S 30.160.1.1
– SV/S 30.320.1.1
– SV/S 30.640.3.1
(total current I1 and I2)
Short-circuit current ISc
0.5 A
0.8 A
1.4 A
Power failure buffering time 200 ms
Connections KNX Bus connection terminal

Mains voltage input Screw terminal
0.2…2.5 mm2 fine-strand
0.2…4 mm2
solid
Tightening torque Maximum 0.6 Nm
Operating and display elements LED status (two-colored green/red) Green: I < IOvl
Red: overload.
Red, flashing: short-circuit

Degree of protection IP 20 EN 60 529
Protection class II EN 61 140
Isolation category Overvoltage category III under EN 60 664-1
Pollution degree 2 under EN 60 664-1
Temperature range Operation – 5 °C…+45 °C
Storage -25 °C…+55 °C
Transport -25 °C…+70 °C
Ambient conditions Maximum air humidity 93 %, no condensation allowed
Design Modular installation device (MDRC) Modular installation device, Pro M
Main dimensions 90 x 72 x 64.5 mm (H x W x D)
Mounting width 4 x 18 mm modules
Mounting depth 64.5 mm
Mounting On 35 mm mounting rail EN 60 715
Mounting position As required
Weight Approx. 0.25 kg
Housing, color Plastic housing, gray
Approvals KNX under EN 50 090-1, -2
CE mark In accordance with the EMC guideline and
low voltage guideline